Export saves an offline HTML copy with your current checkmarks. Print and export require JavaScript.
Top Champ Plumbing | 774-218-9526 | topchampplumbing.com Online guide: topchampplumbing.com/running-toilet-troubleshooting/
Start with these safety and symptom checks
On many tank toilets, a worn flush-valve seal can let water escape into the bowl. A fill-valve or water-level problem can also cause running. Similar symptoms can have different causes; a dye result does not identify the exact part.
For a conventional gravity-flush toilet with an accessible tank. For pressure-assisted, concealed-tank, tankless or powered toilets, follow the model's instructions or ask a plumber; do not open pressure vessels or electrical covers.
1. Water outside the toilet, a visible crack, or a rising bowl?
Yes: Stop using it. Do not flush or do the dye test. Keep clear of wastewater and electrical hazards. If safely accessible and familiar, close the toilet's supply valve; do not force it. Get plumbing help.
No: Continue to question 2.
2. Is it a conventional gravity tank you can safely inspect?
Yes: Lift the heavy lid only if comfortable; place it flat on a secure surface. Observe without dismantling or adjusting parts. Continue to question 3.
No: Skip the tank checks. Note the model and symptoms, and use manufacturer guidance or contact a plumber.
3. Does water keep running or restart between uses?
Yes: Note constant running versus occasional refilling. Look for water entering the upright overflow tube after refilling should have stopped. Try the dye test in the next section if appropriate.
No: Record when the symptom happens. A quiet toilet now does not rule out an intermittent leak. If the problem returns, seek an assessment.
A simple tank-to-bowl dye test
Checkmarks are saved in this browser on this device. Clearing site data or ending private browsing may remove them. They do not sync to another browser or device. Checkmarks record steps you have taken, not proof that the toilet is safe or repaired. Reset and recheck for a new problem.
Check off the steps you have taken. Automatic saving requires JavaScript and available browser storage.
Color appeared: Color in the bowl without flushing indicates a tank-to-bowl leak. Arrange an assessment or follow model-specific repair guidance; do not assume a generic replacement part will fit.
No color appeared: No color means no leak was detected by this test at that time. Persistent running, intermittent refilling or visible water still needs attention.
If several fixtures are slow or backing up, stop testing and report that too. Do not tighten mounting bolts, lift the toilet, disconnect supply lines or attempt internal repairs as part of this checklist.
Start over
Reset only this guide. You will be asked to confirm.
Repair or replacement?
Repair may suit an otherwise sound toilet with a confirmed, repairable fault and compatible parts. Discuss replacement when the fixture is damaged, faults recur, suitable parts are unavailable, or fit and performance no longer meet your needs. A new toilet will not automatically fix a drainage problem.
Use the printable worksheet to note the bathroom, model, date, dye-test result and whether running is constant or occasional. Keep personal notes on your printed copy.